Electrical
Klauke offers you - energy generators, network operators and service providers in the energy sector - an expanded product range. Alongside the products from the Klauke and Greenlee brands for the low voltage sector, products from the HDE brand are now being offered for high and medium voltage applications.
The HDE brand belongs to the company of the same name. HDE has been part of the Textron Group, to which Klauke and Greenlee belong, since 2013. Thanks to the product range being expanded by HDE, we offer not only products for testing, measuring and controlling, but also suitable connecting materials and tools from Klauke and Greenlee.
The HDE measuring and safety products are state-of-the-art and give you reliable, accurate and important information on the electrical supply system and the associated equipment and devices. The HDE products can be used for servicing and maintenance work, and also ensure the safe, reliable and effectively rectification work in power supply networks. All inspection, test and measuring devices conform to national and international directives and standards, thereby guaranteeing maximum safety for the user.
Products for working in the electrical energy sector
An overview of products from the Klauke, Greenlee and HDE brands is provided below. These products support you when working in the high, medium and low voltage sectors.
DM-860A Industrial digital multimeter, True RMSCharacteristics- Recording of maximum, minimum and maximum/minimum results
- Recording of peak value (5 ms peak hold) max, min and max/min results
- 5 5/6-place display with a display range of 500,000 for greater precision
- Carrying out frequency, temperature and capacity measurements as well as diode tests and continuity checks
- Display of the relative measured value offset for checking the relative measured value changes
- Automatic range selection
- Analogue 41-segment bar chart
- Large, backlit LC-display
- Temperature measurements up to 1,000 °C
Portable Voltage TesterCharacteristics- Contactless voltage testing
- Clear LED and acoustic warning signal when the voltage has been determined
- ON/OFF switch provides longer battery service life
- Handy pen format, which fits easily into a jacket or tool pocket
- Fast, easy replacement of batteries
- Automatic self test
Mechanical Hand Crimping and Cutting Tools- K 30/3 Crimping tool for cable end-sleeves and twin cable end-sleeves 0.08 - 10 mm²
- K 28 Crimping tool for cable end-sleeves and twin cable end-sleeves 4 - 50 mm²
- K 05 D / K 05 D SP Crimping tools for DIN compression cable lugs and connectors 6 - 50 mm²
- K 22 Crimping tool for interchangeable dies 6 - 300 mm²
- HK 60/22 Hand-operated hydraulic crimping tool 6 - 300 mm²
- HK 120/42 Hand-operated hydraulic crimping tool 16 - 400 mm²
- K 30/3 Crimping tool for cable end-sleeves and twin cable end-sleeves 0.08 - 10 mm²
Battery Operated Crimping, Cutting and Hole Making Tools- EKM 60/22-L Battery powered crimping tool 6 - 300 mm²
- EKM 60 ID-L Battery powered crimping tool 10 - 240 mm²
- EK 60 UNV-L Battery powered universal tool 6 - 300 mm²
- EK 120/42-L Battery powered crimping tool 16 - 400 mm²
- EK 50 ML Electromechanical crimping tool 0.14 - 50 mm²
- AHP 700-L Battery powered hydraulic pump, 700 bar
- PK 1000 Hydraulic crimping head, 100 t, up to 1600 mm²
- EKM 60/22-L Battery powered crimping tool 6 - 300 mm²
ESSG Battery powered hydraulic safety cutting units up to max. 105 mm dia.- BG-tested safety cutting unit guarantees safe cuts of live copper and aluminium cables without steel armouring up to a rated voltage of 60 kV
- Single-conductor lives cables without steel armouring can be cut under voltage of up to 110 kV/60 Hz
- Powerful 3.3 Ah Li-Ion battery
Characteristics - 2-stage hydraulic system with fast feed and power stroke
- Quick motor stop for high user safety
- Electronic control
- Multifunction LED for maintenance control and charging display of the battery
- LED display for service interval after 250 cuts
- 10 m non-conducting hydraulic hose with a coupling to connect to pump ESSG-L
Stray Voltage Detector LV-5- Detect stray voltage as low as 5 V AC
- Rugged, utility-grade design is waterproof
- Can be used for street light poles, guide guy wires, meter cans, and much more
Characteristics- Ultra bright, long-lasting LED
- Tester integrated into the holster
HDE Proximity Voltage Detector PRX-500- Rechargeable battery with quick recharge - 15 minutes for more than a full day of use
- Loud beeper and lights indicate voltage
- Can be used in overhead applications
Characteristics- Typical detection distance of 25 cm
- Dual hot-stick connections - universal spline and shotgun stick
- Voltagelevel adjustable 120 V - 500 kV
V-Watch Personal Voltage Detector for above 1000V- Alerts user to the dangerous presence of high voltage
- Warning distance increases with higher voltages
Characteristics- Provides another level of safety
- Audible and visual alarms increase in frequency the closer the user gets to energized equipment
- Typical warning distance is about 2 m from a 4 kV AC conductor
HDE Rope Tester RT-200- Continusously test any length of rope or straps
- Ropes with diameters ranging from 0.95 cm to 3.8 cm can be tested
Characteristics- Dielectric condition is displayed by green (good) or red (bad) LED´s
- Audible buzzer sounds if defective section of rope is found
- Compact and lightweight design
- Integrated battery
HDE Voltmeter and Phasing Set- Dual stick voltmeter and phasing set
- Can be used in overhead and underground applications
Characteristics- Digital meter reads in kilovolts
- Backlit display
- Accuracy is 1 % of reading
- Peak hold
HDE Digital Voltage Indicator for HV DVI-500- Large LED display
- Can be used in overhead and underground applications
Characteristics- Audible indication when voltage is detected
- Voltage readout allows the user to distinguish
- Bushing probe for underground applications
HDE High Voltage Digital Ammeter HVA-2000- Large LED display
- Quickly take current readings
- Can be used in overhead and underground applications on conductors up to 7.0 cm
Characteristics- Small and lightweight, easy to manage on an extension hotstick
- Stores the last 4 readings
HDE Transformer Tester TILT-II- Provide quick and easy checks of transformers for opens or shorts on power distribution systems
- Single button automatic testing
Characteristics- Tests the primary and secondary sides of de-energized transformers without disconnecting
- Audible alarm confirms successful test
- Bright LED
- Provide clear indications of open circuits, short circuits and confirmation that the results are OK
- Built in self-test failure
- Magnet hold
HDE Insulator Tester- Detects non-visible insulator failures
- Adjustable contact probes
- Tests all types of porcelain and ceramic insulators
Characteristics- LED scale displays the condition of the insulator being tested
- Buzzer provides audible warning of bad insulators
- Universal spline for attachment to a hotstick
- Test insulators quickly, safely and reliably